Advertisement
J
m
WARNING
Electrical
Shock and Personal
Injury Hazard
Disconnect
electrical
supply
before
servicing
or cleaning
the unit. Failure
to do so could
result
in electrical
shock
or
personal
injury
from vacuum
cleaner
suddenly
starting.
TO REMOVE LIGHT BULB
1, Disconnect power cord from electrical outlet.
2. Press handle release pedal and lay
vacuum cleaner back.
3. Remove the two
(2) screws from the
lens cover,
4. Insert flat blade of
screwdriver
into slot
at top of the lens.
Lift the lens cover to
remove.
CAUTION
Do not use a bulb rated over 9W
(43V).
During extended
use, heat
from the bulb could overheat
surrounding
plastic
parts.
5. Pull bulb out of
sockeL Do NOT
twist° Gently push
replacement
bulb into
socket to replace,
6, Snap lens cover
back into place and
secure the headlight
lens by replacing
the
two screws.
Note: See separate PARTS
LIST for bulb
number_
Press the automatic
cord rewind lever to
draw in the power
cord. NOTE: Hold
onto the power
cord to prevent the
cord from whipping
during the automatic
cord rewind.
Store the vacuum
cleaner in a dry,
indoor area, on
the floor with the
handle locked in the
upright position.
14
Advertisement
