Oki C5510nMFP Handy Reference page 40

Troubleshooting
Codes/Messages (cont'd)
SCANNING
UNIT DISPLAY
40033
Printer Error
Check the Printer
40034 (Y)
40035 (M)
40036 (C)
Printer Error
Check the Printer
40992
Printer Error
Check the Printer
40037
Printer Error
Check the Printer
Failed to Detect
Printer
PRINTING MFP STATUS
UNIT OP
PANEL
FXFF Belt lock or
black drum
installation
problem
FXFF Image drum
not installed
correctly.
FXFF Fuser unit is
not installed
correctly.
FXFF Transfer belt is
not installed
correctly.
N/A Failed to detect
printer.
Check that transfer belt locks are in
locked position. Check that black drum
is properly installed.
Check that the image drum indicated
is properly installed and fully seated.
Reseat the Fuser Unit, make sure it is
locked in place.
Reseat the transfer belt, make sure it
is locked in place.
Power OFF printing and scanning units.
Check that the USB cable is connected
properly. Power ON printing unit, wait
until initialized, then power ON
scanning unit.
39
SOLUTION