Choosing A Location; Using The Fax As A Printer Or For Pc-Fax Send - Brother 1960C - IntelliFAX Color Inkjet Quick Setup Manual

Setting Up the Machine
17

Choosing a location

Choose a location where the temperature remains
between 50° F and 95° F (10° and 35° C).
DO NOT put the cordless handset near heaters,
air conditioners, water or chemicals.
DO NOT expose the cordless handset to direct
sunlight, excessive heat, moisture, or dust.
DO NOT use the cordless handset near electro-
medical equipment.
We recommend at least 9.8 ft (3 m) between the
machine (base unit) or cordless handset and
possible sources of radio interference.
18 Putting up an antenna of the
base unit
1
Move the antenna to the up position as shown
below.
Note
Avoid using in an area where it is difficult for radio
waves to penetrate such as in a reinforced
concrete building, near metal furniture or doors.
14
mouse headset USB memory
Bluetooth product
9.8 ft
(3 m)
9.8 ft 9.8 ft
(3 m) (3 m)
19 Using the Fax as a printer or
for PC-Fax send
You can download the Brother printer driver and
PC-Fax send driver from the Brother Solutions Center
for use with FAX-1960C.
Visit us at: http://solutions.brother.com
Follow install instructions on the Driver download page.
Note
• Please download the printer driver first before
connecting the machine to your computer with a
USB cable.
• You must use an appropriate USB 2.0 interface
cable. If you do not have it, please purchase a
USB 2.0 interface cable that is no longer than 6
feet long (2 meters).
• Your machine has a USB interface that is compatible
with the USB 2.0 specification. This interface is also
compatible with High-Speed USB 2.0; however, the
maximum data transfer rate will be 12 Mbits/s. The
machine can also be connected to a computer that
has a USB 1.1 interface.
• Third party USB ports are not supported for
®
Macintosh .
Note
Connecting the USB cable
1 Insert the USB cable into the USB port marked
with a symbol. You will find the USB port next
to the handset cord port as shown below.
2 Connect the USB cable to your computer.
Improper Setup
DO NOT connect the machine to a USB port on
a keyboard or a non-powered USB hub.
Brother recommends that you connect the
machine directly to your computer.