Process At Hdd Replacement - Toshiba Gigabeat S MES60V Service Manual

3.3.3. Process at HDD replacement

When replaced to the un-formatted HDD, restore the HDD in the factory setting state by transferring the
firmware and the supplied data to the HDD in the procedure below.
[HDD formatting]
1) Set the BATTERY switch to "OFF".
2) Connect the AC adaptor and start up the unit.
3) Format automatically the HDD and display the menu below on the LCD. Wait until the menu appears.
Fig. Menu of waiting for the PC connection
[T&D Transfer]
4) Start up [Transfer Program (Ottoman.exe) on the PC and select the scenario file (*.ini) in which files
to be transferred are described. Ottoman.exe and the scenario file are provided on the CD-ROM
(Material No.: 360058245). Names for the destination-wise stored folder and file are different depending
on the destination. The relationship between destination and folder is shown on the table below.
Table Destination and Folder
Destination
Japan
U.S.A.
Start up Ottoman.exe and select the scenario file. Then, the menu below appears.
Folder name
OTTOMAN_T&D_FW_JP
OTTOMAN_T&D_FW_US
Scenario file name
OTTOMAN_T&D_FW_JP.ini
OTTOMAN_T&D_FW_US.ini
9