H/W Monitor - MSI MS 7030 - K8N Neo Platinum Motherboard User Manual

MS-7030 ATX Mainboard

H/W Monitor

This section shows the status of your CPU, fan, overall system status, etc. Monitor
function is available only if there is hardware monitoring mechanism onboard.
Chassis Intrusion Detect
The field enables or disables the feature of recording the chassis intrusion status
and issuing a warning message if the chassis is once opened. To clear the warning
message, set the field to [Reset]. The setting of the field will automatically return to
[Enabled] later. Setting options: [Enabled], [Reset], [Disabled].
Smart NB/CPU Fan Target
There are 2 pairs of Temperature/FAN Speed control: System Temperature with NB
Fan, and CPU Temperature with CPU Fan. W83627THF provides the Smart Fan sys-
tem which can control the fan speed automatically depending on the current tem-
perature to keep it with in a specific range. Settings: [Enabled], [Disabled].
o
NB/CPU Fan Tolerance ( C)
You can select a fan tolerance value here for the specific range for the Smart NB/
CPU Fan Target items. If the current temperatures of the 2 fans reach the maximum
threshold (the temperatures set in the Smart NB/CPU Fan Target plus the toler-
ance values you set here), the fans will speed up for cooling down. On the contrary
if the current temperatures reach the minimum threshold (the set temperatures minus
the tolerance values), the fans will slow down to keep the temperatures stable.
PC Health Status
Press <Enter> and the following sub-menu appears.
3-22