MSI MS 7030 - K8N Neo Platinum Motherboard User Manual page 107

7030 ATX Mainboard
More About Rebuilding Arrays
• Rebuilding Occurs in the Background
The rebuilding process is very slow (it can take up to a day) and occurs in the
background so as not to affect the performance of the system.
• Rebuilding Applies Only to RAID 1 or RAID 0+1 Arrays
Rebuilding an array works only when using RAID1 and/or RAID 0+1. Rebuilding does
not apply to RAID 0 and JBOD arrays.
• You Can Use Any Available Free Disk
You can rebuild a mirrored array using any available Free Disk or Dedicated Disk.
For example, the figure below shows a mirrored array using 34.48 GB HD while
having two Free Disks each 55.90 GB large.
To use one of these available free disks to rebuild your array, follow the same steps
as explained in "Rebuilding a RAID Mirrored Array" on p.5-20, except when prompted
to select a disk, choose one of the two available free disks.
5-22