Installing The Raid Driver (For Bootable Raid Array) - MSI MS 7030 - K8N Neo Platinum Motherboard User Manual

7030 ATX Mainboard

Installing the RAID Driver (for bootable RAID Array)

1. After you complete the RAID BIOS setup, boot from the Windows CD, and the
Windows Setup program starts.
2. Press F6 and wait for the Windows Setup screen to appear.
3. Specify the NVIDIA drivers:
(1) Insert the floppy that has the RAID driver, press S, then press Enter. The
Windows Setup screen appears as below:
MSI Reminds You...
Please follow the instruction below to make an nVIDIA Serial ATA RAID
driver for yourself.
1. Insert the MSI CD into the CD-ROM drive.
2. Ignore the Setup screen and use "Explorer" to browse the CD.
3. Copy all the contents (including the sub-folders) in the
\\nVidia\System\CK8S\Win2k-XP\IDE\WinXP to a formatted
floppy disk.
4. The driver disk for nVIDIA Serial ATA driver is done.
(2) Select "NVIDIA RAID CLASS DRIVER" and then press Enter.
(3) Press S again at the Specify Devices screen, then press Enter.
(4) Select "NVIDIA NForce Storage Controller" and then press Enter. The follow-
ing Windows Setup screen appears listing both drivers:
5-8