Software Installation; Windows ® 98Se Setup - MSI K7D MASTER - Motherboard - ATX User Manual

Software Installation

This section will tell you how to setup your USB controller card. The USB
Controller card is "Plug and Play', it means there is no jumper, IRQ, or DIP
switch to set.
Windows 98SE Setup
®
1. Windows will auto-detect the USB Card and display a dialog "New
Hardware found" during system boot up. Press "Next" on the
"Add New Hardwae Wizard" screen.
Note:
Because of 2 OHCI and 1 EHCI Cores, system will require to install
respective driver three times. Don't be confused and follow subse-
quent procedures.
2. Select "Search for the best driver for your device(Recommended)"
and click "Next".
USB 2.0 Controller Card
B-7