Release Notes; Hardware Configuration - Novell LINUX ENTERPRISE SERVER 10 - INSTALLATION AND ADMINISTRATION 08-05-2008 Installation Manual

Windows Domain
SMB authentication is often used in mixed Linux and Windows networks. Detailed
information is available in
Directory" (page 709).
NOTE: Content of the Authentication Menu
If you use the custom package selection and one or more authentication
methods are missing from the menu, the required packages probably are not
installed.
Along with the selected user administration method, you can use Kerberos authentication.
This is essential for integrating your SUSE Linux Enterprise to an Active Directory
domain, which is described in
Directory" (page 709). To use Kerberos authentication, select Set Up Kerberos Authen-
tication.

3.14.8 Release Notes

After completing the user authentication setup, YaST displays the release notes. Reading
them is recommended, because they contain important up-to-date information which
was not available when the manuals were printed. If you tested the Internet connection,
read the most recent version of the release notes, as fetched from SUSE Linux Enter-
prise's servers. Use Miscellaneous > Release Notes to view the release notes after instal-
lation.

3.14.9 Hardware Configuration

At the end of the installation, YaST opens a dialog for the configuration of the graphics
card and other hardware components connected to the system. Click the individual
components to start the hardware configuration. For the most part, YaST detects and
configures the devices automatically.
TIP: IBM System z: Hardware Configuration
On the IBM System z, there is no display that would be supported by XFree.
Accordingly, you do not find a Graphics Cards entry on these systems.
Section 37.6, "Samba Server in the Network with Active
Section 37.6, "Samba Server in the Network with Active
Installation with YaST 43