Using The Vt220 Terminal Emulator - Novell LINUX ENTERPRISE SERVER 10 SP1 - ARCHITECTURE-SPECIFIC INFORMATION Specification

Example A.6 Parmfile for Installation with NFS, VNC, and IUCV and AutoYaST
ramdisk_size=131072 root=/dev/ram1 ro init=/linuxrc TERM=dumb
instnetdev=iucv iucvpeer=ROUTER01 pointopoint=192.168.0.1
hostip=192.168.0.2
nameserver=192.168.0.3
install=nfs://192.168.0.4/SLES/SLES-10-s390x/DVD1
autoyast=http://192.168.0.5/autoinst.xml
linuxrcstderr=/dev/console usevnc=1
vncpassword=testing
Example A.7 Parmfile for Installation with NFS, SSH, and HSI and AutoYaST with
ramdisk_size=131072 root=/dev/ram1 ro init=/linuxrc TERM=dumb
AutoYast=nfs://192.168.1.1/autoinst/s390.xml
Hostname=zseries.example.com HostIP=192.168.1.2
Gateway=192.168.1.3 Nameserver=192.168.1.4
InstNetDev=hsi layer2=0
Netmask=255.255.255.128 Broadcast=192.168.1..255
readchannel=0.0.702c writechannel=0.0.702d datachannel=0.0.702e
install=nfs://192.168.1.5/SLES-10-CD-s390x/CD1/
UseSSH=1 SSHPassword=testing linuxrcstderr=/dev/console
A.3 Using the vt220 Terminal
Recent MicroCode Levels allow the use of an integrated vt220 terminal emulator in
addition to the standard line mode terminal. The vt220 terminal is connected to /dev/
ttyS1. The line mode terminal is connected to /dev/ttyS0.
To activate vt220 support on your machine, edit /etc/inittab as user root. Look
for the following line and delete the leading # sign:
# 2:2345:respawn:/sbin/mingetty --noclear /dev/ttyS1 linux
Save the file and run telinit q to pass the changes in /etc/inittab to init. The
vt220 terminal should then be ready to use. If not, try hitting Enter at the terminal until
the login prompt appears.
38 Architecture-Specific Information
with HTTP
NFS
Emulator