Preparing The Ipl Of The Suse Linux Enterprise Server Installation System; Lpar Installation - Novell LINUX ENTERPRISE SERVER 10 SP1 - ARCHITECTURE-SPECIFIC INFORMATION Specification

4 Connect to the SUSE Linux Enterprise Server installation system. See
5 Start installation using YaST and IPL the installed system. See Chapter 3, Instal-
2.3 Preparing the IPL of the SUSE

2.3.1 LPAR Installation

Configure your IBM System z system to start in ESA mode with an appropriate activa-
tion profile and IOCDS. Consult IBM documentation for more about how to achieve
this.
IOCDS: Attaching and Configuring Devices
A SUSE Linux Enterprise Server installation needs at least two devices: a DASD and
a network connection device. For an IPL from tape, a tape device should also be acces-
sible. Devices are configured and attached to an LPAR in the IOCDS (input output
configuration data set). This example defines one DASD, one OSA-2 network device,
and a tape device for LPAR Z1. For further information about how to set up the IOCDS
for Linux, refer to IBM hardware documentation of your machine
.s390.ibm.com/linux/press.html).
16 Architecture-Specific Information
"Connecting to the SUSE Linux Enterprise Server Installation System"
lation with YaST (↑Installation and Administration).
Linux Enterprise Server
Installation System
Section 2.6,
(page 26).
(http://www