Table of Contents
Advertisement
12.5 Monitoring Print Jobs in KDE
Start KJobViewer from the main menu or with kjobviewer from the command line.
A window like that in
Figure 12.3, "Monitoring Print Jobs with KJobViewer"
(page 194)
opens, listing all the print jobs queued on your printer. As long as your print job is not
active, you can edit it. Do this using the entries of the Jobs menu.
Figure 12.3 Monitoring Print Jobs with KJobViewer
If, for example, you want to check if you sent the correct document to the printer, you
can stop the job and resume it if you decide to print it. Remove your own print jobs
from the queue with Remove. To change the printer, select a different printer with Move
to Printer.
With Restart, reprint a document. To do this, select Filter > Toggle Completed Jobs,
select the desired document, and click Jobs > Restart. Clicking Jobs > Job IPP Report
shows the technical details of a job. Use Jobs > Increase Priority and Jobs > Decrease
Priority to set the priority, depending on how quickly you need the document.
Filter enables you to switch between various printers, toggle completed jobs, and limit
the view to your own print jobs by selecting Show Only User Jobs. The current user is
then displayed in the top right field.
Settings > Configure KJobViewer opens a configuration dialog. Here, determine the
maximum number of print jobs to display. Enter a number in the field or use the slider
to the right to determine a value. Press OK to save the setting or Cancel to exit the dialog
without saving.
194
KDE User Guide
Advertisement
Table of Contents
Troubleshooting
