Table of Contents
Advertisement
D.2 Configuring Your Wacom Device
After the Tablet PC packages have been installed, configure your tablet device. Currently,
SUSE Linux Enterprise does not support configuration of Wacom devices with SaX2.
Instead, it is necessary to edit a system configuration file. Only the system administrator
can make the changes to the /etc/X11/xorg.conf file.
For an overview about /etc/X11/xorg.conf and an introduction to manual con-
figuration of the X Window System, refer to Section "Manually Configuring the X
Window System" (Chapter 23, The X Window System, ↑Deployment Guide).
WARNING: A Faulty X Configuration Can Damage Your Hardware
Before editing the /etc/X11/xorg.conf file, create a backup of the original
file. Do not edit other sections of the file, because this can cause damage to
your hardware.
For Wacom devices, add a couple of lines to /etc/X11/xorg.conf as shown in
Example D.1, "Configuration for Wacom Devices"
(page 328).
Support of Tablet PCs
327
Advertisement
Table of Contents
Troubleshooting
