Table of Contents
Advertisement
4 Click Forward. The next window shows a summary of the parameters that you
5 If all parameters are set according to your wishes, click Apply to finish the confi-
To complete your fencing configuration add constraints, or use clones or both. For more
details, refer to Chapter 8, Fencing and STONITH (page 81).
4.4 Configuring Resource Constraints
Having all the resources configured is only part of the job. Even if the cluster knows
all needed resources, it might still not be able to handle them correctly. Resource con-
straints let you specify which cluster nodes resources can run on, what order resources
will load, and what other resources a specific resource is dependent on.
There are three different kinds of constraints available:
Resource Location
Locational constraints that define on which nodes a resource may be run, may not
be run or is preferred to be run.
38
High Availability Guide
3b From the Class list, select the resource agent class stonith.
3c From the Type list, select the STONITH plug-in for controlling your
STONITH device. A short description for this plug-in is displayed below.
3d Below Options, set the Initial state of resource.
3e Activate Add monitor operation if you want the cluster to monitor the fencing
device. For more information, refer to Section 8.4, "Monitoring Fencing
Devices" (page 88).
have already defined for that resource. All required Instance Attributes for the
selected STONITH plug-in are listed. You need to edit them in order to set them
to appropriate values. You may also need to add more attributes or monitor oper-
ations, depending on your deployment and settings. For details how to do so,
refer to Procedure 4.2, "Adding or Modifying Meta and Instance Attributes"
(page 36) and Section 4.7, "Configuring Resource Monitoring" (page 46).
guration of that resource. The configuration dialog is closed and the main window
shows the newly added resource.
Advertisement
Table of Contents
Troubleshooting
