Installation On Top Of An Already Installed System - Novell LINUX ENTERPRISE 11 - SUBSCRIPTION MANAGEMENT TOOL GUIDE 10-02-2009 Manual

4 If you are installing from CD, insert the SUSE Linux Enterprise Point of Service
5 Confirm the SUSE Linux Enterprise Point of Service license agreement and click
6 The SUSE Linux Enterprise Point of Service add-on product is displayed in the
7 In the Software Selection and System Tasks dialog, select the SUSE Linux Enter-
8 Continue with installation as usual. Make sure to uncheck the Clone This System
2.2 Installation On Top of an Already
To install SUSE Linux Enterprise Point of Service on top of an already installed base
system, follow these steps:
1 Start YaST and select Software > Add-On Products > Add.
2 Select media type to be used for installation. If you are installing SUSE Linux
22 SUSE Linux Enterprise Point of Service Guide
add-on product CD. If you are installing from a different source, provide the
necessary source. Click Continue.
Next.
overview. Click Next and continue with the installation as usual.
prise Point of Service patterns appropriate for the type of server you are installing.
For Administration Server, select the SLEPOS Admin Server pattern. For Image
Building Server, select the SLEPOS Image Server and SLEPOS Image Descrip-
tions patterns. For Branch Server, select the SLEPOS Branch Server pattern. You
can combine the patterns to install a server with multiple functions (for example
an Administration Server with image building capabilities).
for AutoYaST option before clicking Finish at the end of the installation procedure.
WARNING: Cloning the System for AutoYaST Must Be Disabled
When installing SUSE Linux Enterprise Point of Service, cloning the system
for AutoYaST at the end of the installation procedure must be disabled.
Installed System
Enterprise Point of Service from a CD medium, select CD as the source type. If
you are installing from a different source, such as NFS or HTTP, choose the ap-
propriate source type. Click Next.