Table of Contents
Advertisement
umount /mnt/ifolder3
5j Modify the server settings so that Apache does not load at boot and Apache starts and
stops are controlled with the cluster's load and unload scripts. At the server console, enter
chkconfig apache2 off
5k Repeat the preceding steps to configure any additional nodes in your iFolder cluster.
6 Continue with
Section B.4, "Creating the iFolder 3.x Cluster Resource," on page
B.4 Creating the iFolder 3.x Cluster Resource
1 In iManager Roles and Tasks, expand the Clusters role, then select Cluster Options.
2 Specify the cluster name, or browse and select the Cluster object.
3 Click New.
4 Specify Resource as the resource type you want to create by clicking the Resource radio button,
then click Next.
5 Enter the name of the resource you want to create, such as iFolder3.
Do not use periods in cluster resource names. Novell clients interpret periods as delimiters. If
you use a space in a cluster resource name, that space is converted to an underscore.
6 Browse for the Generic_IP_Service to Inherit From.
7 Select Define Additional Properties, then click Next.
8 For the cluster Load Script, use one of the sample load scripts as a guide, then click Next.
For information, see
9 For the cluster Unload Script, use one of the sample unload scripts as a guide, then click Next.
For information, see
page
131.
10 Complete the remaining screens, then click Finish.
11 Continue with
Section B.5, "Managing the iFolder 3.x Cluster Resource," on page
B.5 Managing the iFolder 3.x Cluster Resource
In iManager Roles and Tasks, expand the Clusters role, then click Cluster Manager to manage the
iFolder 3.x resource and bring it online.
For information, see
"Managing Novell Cluster Services" (http://www.novell.com/documentation/
oes/cluster_admin_lx/data/aj7bq8o.html)
Guide for Linux.
B.6 Sample Load Scripts for iFolder 3.x Clusters
•
Section B.6.1, "Linux Traditional File System," on page 129
•
Section B.6.2, "NSS File System," on page 130
B.6.1 Linux Traditional File System
If your shared volume uses a Linux traditional file system, use the following load script as a guide:
Section B.6, "Sample Load Scripts for iFolder 3.x Clusters," on page
Section B.7, "Sample Unload Scripts for iFolder 3.x Clusters," on
in the OES Novell Cluster Services 1.8 Administration
Clustering iFolder 3.x Servers with Novell Cluster Services for Linux 129
129.
129.
129.
Advertisement
Table of Contents
