Advertisement
Settings menu
Under settings menu, you can set:
• Say a command prompt - Enables or Disables the "Say a command prompt". With it disabled,
you will hear a beep instead of voice command.
• Incoming call announcement - Enables or Disable the Incoming call ID prompt and voice
answer functions (this function may not available on some phones).
• Save favorite - A phone number can be saved on the headset after you received an incoming call.
• Voice control help
• Turn off voice control - Turns off the voice control. To re-enable, hold the "Vol+" and "Vol-" button
simultaneously for about 6 seconds.
Reset the Crescendo headset
If the headset fail to communicate or any abnormal behavior, you may need to do hardware reset,
which will make the headset get back to normal work again. If hardware reset doesn't resolve
your problem, you may need to do software reset, which will deletes all pairing information, reset
the voice interface and reboot headset back to pairing mode.
To do hardware reset, press once on the Main Button together with "Vol-"button.
To do software reset, press main button together with "Vol +" button for 6 sec until the red LED
flashes.
8 I BLUETREK CRESCENDO
Advertisement
