CITROEN XSARA Technical Training Manual page 101

83
Chapter 3
3 - Initialising the maintenance indicator
The initialisation procedure is used to assign a new mileage value and a
new time value to the system.
The procedure is as follows:
1 - Press the Tripometer reset button.
2 - Switch on the ignition.
The display shows a key (LED V19) and a 10 second counter starts to
count down.
3 - Keep the Reset button pressed during these 10 seconds.
The key disappears and the reading "=0" appears. The operation is
validated.
4 - Switch off the ignition to quit initialisation.
MULTIPLEXED BSI - XSARA PICASSO AND XSARA – PART 4
© AUTOMOBILES CITROËN Toute reproduction ou traduction même partielle sans l'autorisation écrite d'AUTOMOBILES CITROËN est interdite et constitue une contrefaçon