Phase Switch; Low Battery Indicator - Fishman POWERMIX Manual

Piezo/magnetic outboard mixing preamp
Table of Contents

Advertisement

NOTE: If you route two signals through the Mag / Stereo Input jack and
plug a third signal into the Piezo Input jack, the signal that normally
appears at the Ring of the Mag / Stereo Input jack will be replaced
(overridden) by the signal appearing at the Piezo Input jack.
MIX OUTPUT JACK
A combination of buffered magnetic pickup and Powerbridge signals appear
at this instrument level output.

PHASE SWITCH

If you experience a volume loss when combining the Powerbridge with the
guitar's magnetic pickups, flip this switch to correct the phase relationship
between the two.

LOW BATTERY INDICATOR

When plugging into the Mix Output jack, the Low battery LED will flash
momentarily, indicating that the power is on. When the Low Battery LED
stays on with the jack plugged in, it's time to change the battery.
VOLUME CONTROL
This affects the piezo volume only.
BASS AND TREBLE CONTROLS
These are shelving style boost/cut tone controls. These affect only the
piezo pickup.
MIDRANGE CONTROL
This is a resonance style boost/cut tone control. It affects only the piezo
signal.
8
PowerMix

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents