Chapter 7 Troubleshooting; Basic Functioning - NETGEAR DGN2200M - Wireless-N 300 Router User Manual

Troubleshooting
7.
This chapter provides information about troubleshooting your N300 Wireless ADSL2+ Modem
Router DGN2200M Mobile Edition. After each problem description, instructions are provided to
help you diagnose and solve the problem. For the common problems listed, go to the section
indicated.
• Is the router on?
Go to

Basic Functioning

• Have I connected the router correctly?
Go to Basic Functioning
• I cannot access the router's configuration with my browser.
Go to Cannot Log In to the Wireless-N Modem Router
• I have configured the router but I cannot access the Internet.
Go to Troubleshooting the Internet Connection
• I cannot remember the router's configuration password.
Go to Restoring the Default Configuration and Password
• I want to clear the configuration and start over again.
Go to Restoring the Default Configuration and Password
Basic Functioning
After you turn on power to the router, the following sequence of events should occur:
1. When power is first applied, verify that the Power LED is on.
2. After approximately 10 seconds, verify the following:
• The LAN port LEDs are lit for any local ports that are connected.
• The ADSL Link LED is lit.
If the ADSL link LED is lit, a link has been established to the connected device. If a LAN
port is connected to a 100 Mbps device, verify that the port's LED is green. If the port is
10 Mbps, the LED is amber.
on page 99.
on page 99.
on page 102.
on page 103.
on page 107.
on page 107.
Chapter 7. Troubleshooting
7
| 99