Configuring Usb Storage Advanced Settings - NETGEAR DGN2200M - Wireless-N 300 Router User Manual

N300 Wireless ADSL2+ Modem Router DGN2200M Mobile Edition User Manual
You can use this screen to select a folder, to change the Share Name, or to change Read
Access or Write Access from All-no password to admin. The password for admin is the
same one that is used to log in to the router main menu. By default it is password.
Note: You must click Apply for your changes to take effect.

Configuring USB Storage Advanced Settings

To configure advanced USB settings, from the router menu, under USB, select Advanced
Settings. The USB Storage (Advanced Settings) screen displays:
You can use this screen to specify access to the USB storage device. The following table
explains the fields and buttons in the USB Storage Advanced Settings screen.
Table 12. USB Storage Advanced Settings
Fields
Network Device Name
Workgroup
Description
The default is readyshare. This is the name used to access the USB
device connected to the wireless modem router from your computer.
If you are using a Windows Workgroup rather than a domain, the
workgroup name is displayed here.
Chapter 5. USB Storage | 69