Option Menu - Yamaha HTR 6230 - AV Receiver Owner's Manual

The following is an example where "DVD" is renamed
"My DVD."
DVR V-AUX
DVD My DVD
1
Press one of the input selector buttons (f)
or vMULTI CH IN to select the input
source you want to change the name of.
2
Press hAMP and then press ll / h on the
remote control to place the "_" (underscore)
under the space or the character you want to
edit.
3
Press lk / n to select the character you
want to use and then press ll / h to move
to the next space.
Notes
• You can use up to 8 characters for each input.
• Press ln to change the character in the following order, or press
lk to go in the reverse order:
A to Z, a space, 0 to 9, a space, a to z, a space, symbols (#, *, –, +,
etc.)
4
Repeat steps 1 through 3 to rename each
input source.
5
Press kMENU to exit from "INPUT
RENAME."
C)VOLUME TRIM
Volume trim
Use this feature to adjust the level of the signal input at
each jack. This is useful if you want to balance the level of
each input source to avoid sudden changes in volume
when switching between input sources.
Press one of the input selector buttons (f) or
vMULTI CH IN to select the input source you
want to adjust the level.
Choices: CD, TUNER, MD/CD-R, DVD, DTV/CBL,
V-AUX (DOCK), DVR, MULTI CH IN
Control range: –6.0 to 0.0* to +6.0 dB
Control step: 1.0 dB
D)DECODER MODE
Decoder mode
■
Decoder select mode
Use this feature to designate the default decoder mode for
the input sources connected to the DIGITAL INPUT
jacks.
Choice
AUTO*
Automatically detect the type of input signals and
selects the appropriate decoder mode.
LAST
Automatically select the last decoder mode used the
connected input source.
pDVD
DTV/CBL MD/CD-R TUNER CD
Function
■
DTS decoder prioritize setting
Choice
AUTO*
Automatically detect the type of input signals and
selects the appropriate input mode.
DTS
Enables to playback a DTS-CD.
Multi channel input setup
E)MULTI CH SET
■
BGV
BGV
Use this feature to select the video source played in the
background of the sources input from the MULTI CH
INPUT jacks.
Choices: LAST*, DVR, V-AUX, DTV/CBL, DVD
y
• Select "LAST" to set this unit to automatically select the last selected
video source as the background video source.

3 OPTION MENU

Use this menu to adjust the optional system parameters.
y
• Initial settings are indicated by (*) in this following each parameter.
A)DISPLAY SET
Display settings
■
DIMMER
Dimmer
Use this feature to adjust the brightness of the front panel
display.
Control range: –4 to 0*
Control step: 1
• Press ll to make the front panel display dimmer.
• Press lh to make the front panel display brighter.
B)MEMORY GUARD
Memory guard
■
Memory guard MEM.GUARD
Use this feature to prevent accidental changes to DSP
program parameter values and other system settings.
Choice
OFF*
Turns off the "MEM.GUARD" feature.
ON
Protects:
– sound field program parameters
– all set menu items
– SCENE template parameters
Note
• When "MEM.GUARD" is set to "ON," you cannot select and adjust any
other set menu items.
Set menu
Function
Function
35
En