Chapter 9 Multimedia; Camera; Taking A Geotagged Photo - Gigabyte GSmart i350 User Manual

9.1 Camera

You may use camera function in this device to
capture important moments.
1. Select Start > Programs > Multimedia >
Camera or press and hold Camera Key to
launch camera.
2. Focus on the object you want to shoot and
press halfway and hold Camera Key to
execute auto focus and then press deeply
to take a picture.
3. Use Volume Adjustment side key to zoom
in and out.
4. Tap on to change camera settings.
5. Tap on on screen to enter Pictures &
Videos.
Camera Menu:
Video Mode: Tap on this icon to switch to
video mode.
Pictures & Videos: view your photos
here.
Camera Settings: to open the menu for
camera settings.
Settings:
1. Scene Mode: you may select different
scene modes to fit the shooting
environment.
2. Mode: you may select different shooting
modes for your needs.
3. Effect: you may apply many different photo
effects.
4. Size: 1600 x 1200, 1280 x 960, 800 x 600,
640 x 480, 320 x 240, 160 x 120.
5. Quality: Normal, fine, low.
6. EV: Exposure value ranging from -2.0 to
+2.0.
9 Multimedia
7. Timer Countdown: Off, 5 seconds, 10
seconds.
8. Sequential Shoot: 18, 12, 6, 3, Off
9. Flash: Auto, On, Off.
10. Shutter sound: On, Off
11. Storage: Phone, miniSD. (The storage
location will automatically change to
miniSD card if the miniSD card is plugged
in before launching camera).
12. Flicker Frequency: Auto, 50Hz, 60Hz
13. Time Stamp: Shows photo taking time on a
photo.
14. Confirm Frame: You can choose to
continue shooting, send MMS, not to save it,
or go to Pictures & Videos immediately
after shooting a photo.

9.2 Taking A GeoTagged Photo

You can take GeoTagged photos (photos that
carry the coordinates of where you were when
you took them) and easily share them with
friends through online albums like flickr.
1. After turning on the camera, tap the GPS
button
preview screen to enable/disable the GPS
coordinates photograph function.
2. After turning on GPS, it will start searching
the current GPS coordination and the GPS
button will display as
3. When the device GPS has successfully
locked on satellite signals , the GPS button
will present the status as GPS ON
Under this mode, the photos you take will
carry the current coordinates of where you
are at in EXIF.
4. Aim the camera at the item you would like
to capture, press halfway to focus, full
press to take the picture.
9-1
i350
on the bottom left of the
.
.