Time And Date Settings; Power On/Off, Sleep Mode; My Information Setup - Gigabyte GSmart i350 User Manual

You can also choose your screen display in
Portrait or Landscape.
1. Press and hold OK any time when the
device is on to switch your screen display
between Portrait and Landscape.
You can also change the default screen display
by following the steps below:
1. Tap Start > Settings > System Tab > Screen
> General Tab
2. On General Tab screen, select your desired
orientation. Portrait, Landscape
Right-Handed, Landscape Left-Handed.
3. Tap "OK", the screen will change
accordingly.

1.7 Time and Date Settings

When using the device for the first time, you
are required to set your time zone, time, and
date. You can also tap on the clock icon on
Today's screen to setup time and date.
1. Tap Start > Settings > System Tab > Clock
& Alarms > Time Tab
2. Select "Home" or "Visiting".
3. Select your time zone.
4. Select AM / PM.
5. Use the up and down arrow aside hour,
minute and second to adjust the highlighted
time unit.
6. Tap the down arrow aside the date to open
a calendar, and select a desired month,
date, and year.
7. Tap "OK", a pop-up window will appear on
your screen to confirm to "Save Changes to
the clock settings".
8. Tap "Yes" to save the changes, and exit.

1.8 Power On/Off, Sleep Mode

Press Power On/Off key on the top of the
device to turn on the device.
Sleep Mode
1. Sleep Mode is a power saving mode
designed to reserve battery power. After
idling for a period of time, the device
automatically enters Sleep Mode. You may
also manually enter Sleep mode by
pressing power On/Off key shortly. The
backlight of the screen will turn off and the
device will go into Sleep mode. When in
Sleep mode, your device will show no
response to any operation or touches on
the screen and keypad.
2. Press the power On/Off key again to exit
Sleep mode.
3. You may set the time to activate Sleep
mode. The device will automatically enter
Sleep mode when no operation is done
within that time.
• Tap Start > Settings > System Tab >
Power > Advanced Tab.
• Check "Turn off device if not used for"
Please select "On battery power" or "On
external power".
• Select your desired time period.
• Tap "OK" to complete this setting.
Power Mode
To turn off the device, press and hold Power
On/Off Key on the top of the device for about 5
seconds while the power is on.

1.9 My Information Setup

You can input your personal information to the
device in Owner Information.
1. Tap Start > Settings > Personal Tab >
Owner Information > Identification Tab.
2. Tap on "Name" field and input your name.
3. Tap on a desired input field and input your
information.
4. Tap on the Notes tap to input other
information you would like to display on
your device.
5. If you want your information to be displayed
on the starting screen, tap on the Options
tab, and check both "Identification
1-4
i350