Operation; Remote Control - Yamaha ATS-1010 Owner's Manual

Once you have finished all cable connections and remote control operation, follow the procedure below to start basic
playback operation.

Remote control

3
4
6
7
1
(Power): Turns on the unit, or sets it to
standby mode.
2 Input buttons: Select the input source you want
to listen to.
3 UNIVOLUME: Turns UniVolume mode on and
off. (☞ P. 7)
4 CLEAR VOICE: Turns Clear voice mode on and
off. (☞ P. 7)
5 AUDIO DELAY: Turns the audio delay adjusting
mode on and off. (☞ P. 8)
6 SURROUND/STEREO: Switch surround/stereo
mode. (☞ P. 7)
7 SUBWOOFER +/–: Adjust the subwoofer
volume. (☞ P. 8)
8 VOLUME +/–: Adjust the volume. (☞ P. 8)
9 MUTE: Switches mute mode on and off. (☞ P. 8)
6
En

Operation

Installing the batteries
1
Before installing batteries or using the remote control,
2
make sure that you read precautions on the remote control
and batteries in "Notes on the remote control and
5
batteries" (☞ P. 1).
8
9
Operation range
Use the remote control within 6 m (20 ft) of the main unit
and point it toward the remote control sensor.
1
3
2
Within 6 m
(20 ft)