Side Panel - Fishman DUAL PARAMETRIC D.I. Manual

BAND TWO
Band Two is configured identically to Band One. All controls operate in the same manner as the corre-
sponding controls of Band One.

SIDE PANEL

Inputs and outputs are conveniently located on the side panel, making them easily accessible, whether
the Dual Parametric D.I. is used with other signal processors, mixers, amplifier effects loops, or as a
direct box.
1) 1/4" Input
2) 1/4" Output
3) Ground Lift Switch
1/4" INPUT
This 1/4" unbalanced input jack accepts the signal from guitars, basses, keyboards, acoustic pickups,
microphones, and any other amplifiable instrument. In addition, it accepts signals from other audio gear,
such as the send from an amplifier's effects loop, a compressor/limiter's side-chain output, or a mixer's
effects buss.
1/4" OUTPUT
This 1/4" unbalanced output jack sends the output from the Dual Parametric D.I. to other gear or amplifi-
cation or further processing. Its signal is identical to that found at the XLR output.
EQ / PREAMP / DIRECT BOX
4) XLR Output Jack
5) AC Adapter Jack
13