Irqs Activities - JETWAY V333DAR1C Manual

CMOS Setup Utility – Copyright(C) 1984-2001 Award Software
VGA
LPT & COM
HDD & FDD
PCI Master
Wake-Up on Ring
Wake-Up on PCI PME
PS2 KB Wakeup Selection
Wake-Up On Hot Key (PS2 KB)
Wake-Up on RTC Alarm
x Date of Month Alarm
x Time (hh:mm:ss) Alarm
> IRQs Activities
Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit
¡ ü ¡ ý ¡ ú ¡ û
F5:Previous Values
Wake Up On Ring/PME
During Disabled, the system will ignore any incoming call from the modem. During Enabled,
the system will boot up if there's an incoming call from the modem.
Wake-Up on RTC Alarm
This function is for setting date and time for your computer to boot up. During Disabled, you
cannot use this function. During Enabled, choose the Date and Time Alarm:
Date(of month) Alarm
You can choose which month the system will boot up. Set to 0, to boot every day.
Time(hh:mm:ss) Alarm
You can choose what hour, minute and second the system will boot up.
Note: If you have change the setting, you must let the system boot up until it goes to the
operating system, before this function will work.

IRQs Activities

Please refer to section 3-8-1.1
3-8-1.1 IRQs Activities
Wake Up Events
OFF
LPT/COM
ON
OFF
Disabled
Disabled
Hot Key
Disabled
Disabled
0
0 : 0 : 0
Press Enter
F6:Optimized Defaults
35
Item Help
Menu Level >>
F1:General Help
F7:Standard Defaults