Specification - JETWAY PM9M - REV 2.0 User Manual

1-2 Specification

Spec
Design
Chipset
CPU Socket
(mPGA478B Socket)
Memory Socket
Expansion Slot
Integrate IDE and
Serial ATA RAID
VGA
(for PM9MS/PM9M)
LAN
( for PM9MS/PT9MS
Audio
BIOS
Multi I/O
∗ Micro ATX form factor 4 layers PCB size: 24.4x20.0cm
∗ VIA PM800 North Bridge Chipset for PM9MS/PM9M
∗ VIA PT800 North Bridge Chipset for PT9MS/PT9M
∗ VIA VT8237 South Bridge Chipset
∗ Support Intel Pentium 4 478 Pin package utilizes Flip-Chip Pin
Grid Array (FC-PGA2) package processor
∗ Support 1.5G∼3.2G 478 Pin Pentium 4 processor
∗
Support Hyper Threading /Prescott CPU
∗ Reserves support for future Intel Pentium 4 processors
∗ 184-pin DDR Module socket x 2
∗ Support 2pcs DDR266/DDR33/DDR400 DDR Modules
Expandable to 2.0GB
∗ AGP slot x1 support AGP 2.0 & AGP 3.0 for 4X/8X mode
∗ 32-bit PCI slot x3
∗ Two PCI IDE controllers support PCI Bus Mastering, ATA
PIO/DMA and the ULTRA DMA 33/66/100/133 functions that
deliver the data transfer rate up to 133 MB/s; Two Serial ATA
ports provide 150 MB/sec data transfer rate for two Serial ATA
Devices and offer RAID 0, 1 functions
∗ Integrated High Performance & High Quality 3D Accelerator
∗ Support Ultra-AGPII with 2GB/s bandwidth
∗ Built-in programmable 24-bit true-color RAMDAC up to
250MHz pixel clock
∗ Programmable frame buffer size from 16MB and up to 64MB.
∗ Support Fast Ethernet LAN function provide 10/100 Mb/s data
)
transfer rate
∗ AC'97 Digital Audio controller integrated
∗ 6-channel AC'97 Audio CODEC on board
∗ Audio driver and utility included
∗ Award 2MB Flash ROM
∗ PS/2 keyboard and PS/2 mouse connectors
∗ Floppy disk drive connector x1
∗ Parallel port x1
∗ Serial port x1
∗ USB2.0 port x 4 and headers x 4 (connecting cable option)
∗ Audio connector (Line-in, Line-out, MIC)
Description
2