Miscellaneous Control - JETWAY PM9M - REV 2.0 User Manual

3-11 Miscellaneous Control

This section is for setting CPU Frequency/Voltage Control.
CMOS Setup Utility – Copyright(C) 1984-2004 Award Software
CPU Clock Ratio
Auto Detect PCI/DIMM Clock
Spread Spectrum
** Current Host Clock
Host Clock at Next Boot
** Current DRAM Clock
DRAM Clock at next Boot
VDD Select
AGPVDD Select
VDIMM Select
Flash Part Write Protect
↑↓→← Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit
F5:Previous Values
Auto Detect PCI/DIMM Clock
This item allows you to enable/disable auto detect DIMM/PCI Clock.
Spread Spectrum
This item allows you to set the CPU Host/PCI clock and Spread Spectrum.
The settings are: Enabled, Disabled.
Host Clock at next Boot is
This item allows you to select CPU frequency step by step increasing
The choice are: 100MHz∼132MHz, 133MHz∼200MHz.
DRAM Clock at next Boot is
This field displays the capability of the memory modules that you can use
The choice is either 100MHz or 133MHz (only select CPU Frequency 100MHz.)
AGPVDD Select
This item allows you to select 1.5V of the AGP 4X VGA card. The choice are: 1.5V, 1.6V.
VDIMM Select
This item allows you to select 2.5V of the DDR Module. The choice are: 2.5V, 2.6V, 2.7V,
2.8V.
Miscellaneous Control
8
Enabled
Disabled
100
MHz(By SPD)
1.6V(Default)
1.6V(Default)
2.6V(Default)
Enabled
F6:Optimized Defaults
34
Item Help
Menu Level >
F1:General Help
F7:Standard Defaults