Via 4 In 1 Install Via Service Pack 4 In 1 Driver - JETWAY PM9M - REV 2.0 User Manual

4-1 VIA 4 IN 1 Install VIA Service Pack 4 IN 1 Driver

* The path of the file is X:\VIA\DRIVER\SETUP.EXE
IDE : VIA ATAPI VENDOR SUPPORT DRIVER IS USED TO FIXED COMPATIBILITY
ISSUE FOR IDE DEVICES
AGPVXD : VIA AGPVXD DRIVER IS TO BE INSTALLED, IF YOU ARE USING AN AGP VGA
CARD, VIAGART.VXD WILL PROVIDE SERVICE ROUTINES TO YOUR VGA
DRIVER AND INTERFACE DIRECTLY TO HARDWARE, PROVIDING FAST
GRAPHIC ACCESS
IRQ ROUTING : VIA PCI IRQ MINIPORT DRIVER IS TO BE INSTALLED UNDER WIN98 ONLY,
IT WILL FIX PCI IRQ ROUTING SEQUENCE
INF : VIA REGISTRY DRIVER IS TO BE INSTALLED UNDER WINDOWS
THE DRIVER WILL ENABLE VIA POWER MANAGERMENT CONTROLLER
1. Click IDE when MAGIC INSTALL MENU
appears
3. This is to announce the Copy Write, click
Yes
5. Click NEXT to Install ATAPI Vender
Support Driver
2. Click NEXT when VIA Service Pack Wizard
appears
4. Click NEXT to choose all driver
6. Click NEXT to choose enabled DMA Mode
37