JETWAY 845GPR2A User Manual page 16

(4) PS/2 Mouse & PS/2 Keyboard Connector: KB (PS2 KB/MOUSE)
The connectors for PS/2 keyboard and PS/2 Mouse.
(5) USB Port connector: UL_B1 (USB1)
The connectors are 4-pin connector that connect USB devices to the system board.
(6) LAN Port connector: LAN (Only for 845G PROL)
This connector is standard RJ45 connector for Network connector.
(7) Parallel Port Connector (25-pin female): PARALLEL
Parallel Port connector is a 25-pin D-Subminiature Receptacle connector. The On-
board Parallel Port can be disabled through the BIOS SETUP. Please refer to Chapter 3
"INTEGRATED PERIPHERALS SETUP" section for more detail information.
(8) Audio and Game Connector : GAME
This Connector are 3 phone Jack for LINE-OUT, LINE-IN, MIC and a 15-pin
D-Subminiature Receptacle Connector for joystick/MIDI Device.
Line-out :
Line-in :
MIC :
Game/MIDI :
(9) VGA Connector (15-pin D-Sub) Connector: VGA
VGA is the 15-pin D-Subminiature female connector for display monitor.
(10) Serial Port COM1: COM1
COM1 is the 9-pin D-Subminiature mail connector. The On-board serial port can be
disabled through BIOS SETUP. Please refer to Chapter 3 "INTEGRATED PERIPHERALS
SETUP" section for more detail information.
GND
GND
GND
3.3V
3.3V
5V
Power Connector on Motherboard
Audio output to speaker
Audio input to sound chip
Microphone Connector
For joystick or MIDI Device
PS/2
LAN
Mouse
PS/2
USB COM1
Keyboard
Power Plugs from Power Supply
GAME/MIDI Port
PRINT
VGA
14
BLK
BLK
BLK
ORG
ORG
RED
MIC
LINE-IN
LINE-OUT