Headers - JETWAY 845EPR2A User Manual

This connector connects to the next set of Master and Slave hard disks. Follow the
same procedure described for the primary IDE connector. You may also configure two
hard disks to be both Masters using one ribbon cable on the primary IDE connector and
another ribbon cable on the secondary IDE connector.
(12) Extra IDE RAID Connectors : IDE3/IDE4
•
Two hard disks can be connected to each connector. The first HDD is referred to as the
"Master" and the second HDD is referred to as the "Slave".
•
For performance issues, we strongly suggest you don't install a CD-ROM or DVD-ROM
drive on the same IDE channel as a hard disk. Otherwise, the system performance on this
channel may drop.

2-6-2 Headers

(1) Line-In/Out, MIC Header (9-pin): AUDIO
This header connect to Front Panel Line-In, Line-out, MIC connector with cable.
(2) USB Port Headers (9-pin) : USB2, USB3
IDE 2
Pin 1
Secondary IDE Connector
IDE4
(Secondary IDE)
Pin 1 Pin 1
Extra IDE RAID Connector
AUDIO
L-O UT-R
G ND
MICP
G ND
L-IN-R
Pin 1
Line-In/Out, MIC Headers
15
IDE 1
Pin 1
Primary IDE Connector
IDE3
(Primary IDE)
L-O UT-L
MIC
G ND
L-IN-L