Table of Contents
Advertisement
NOTE: This feature requires that BIOS Wake-Up by PCI Card is enabled.
(11) FAN Speed Headers (3-pin) : FAN1, FAN2, FAN3
These connectors support cooling fans of 350mA (4.2 Watts) or less, depending on the
fan manufacturer, the wire and plug may be different. The red wire should be positive,
while the black should be ground. Connect the fan's plug to the board taking into
consideration the polarity of connector.
(12) IR infrared module Headers (5-pin) : IR
This connector supports the optional wireless transmitting and receiving infrared
module. You must configure the setting through the BIOS setup to use the IR
function.
WOL
1
3
Wake-On-LAN Headers
FAN1
1
3
FAN2
1
3
3
1
FAN3
IR
Pin 1
Infrared Module Headers
21
Hide quick links:
Advertisement
Table of Contents
