User Waypoints - Garmin GPSMAP 3005C - Marine GPS Receiver Owner's Manual

Color chartplotter
Hide thumbs Also See for GPSMAP 3005C - Marine GPS Receiver:
Table of Contents

Advertisement

To access the Points tab from the Main Menu:
1. Press and hold ADJ/MENU to open the Main Menu.
2. Use the ROCKER to highlight the Points tab, and highlight either the User
or Proximity sub tab.
Sub tabs

User Waypoints

The User sub tab on the Points tab shows a master list of all waypoints currently
stored in memory. From the User sub tab, you can review, edit, rename, or delete
individual waypoints, or delete all user waypoints. The number of available and
used waypoints are shown at the bottom of the User sub tab. Stored waypoints are
arranged in alphanumeric order.
GPSMAP 3005C Owner's Manual
b
AsIc
To scroll through and review the waypoint list:
1. Use the ROCKER to highlight the Points tab on the Main Menu, and then
highlight the User sub tab.
2. Press up or down on the ROCKER to scroll through the list of waypoints;
press right or left on the ROCKER to scroll by page.
3. Press ENTER to review the highlighted waypoint on the Review Waypoint
Page.
4. Press the Next soft key to return to the waypoint list. The next waypoint in
the list is automatically highlighted.
Deleting Waypoints
The following soft keys are available when you highlight a waypoint on the User
sub tab:
• New Waypoint—creates a new waypoint.
• Delete—deletes the selected waypoint from the list, and from any route in
which the waypoint was used.
• Del by Smbl—deletes waypoints that use the same symbol.
• Delete All—deletes all waypoints from the unit.
NOTE: When you delete a waypoint from the list, it cannot be recovered from
the unit. Save important waypoints to a data card, or write them down.
To delete a single waypoint from the User sub tab:
1. Use the ROCKER to highlight the waypoint you want to delete, and then
press the Delete Waypoint soft key. A confirmation message appears.
2. Highlight OK, and press ENTER to delete the selected waypoint.
To delete waypoints by symbol:
1. On the User sub tab, highlight the waypoint you want to delete.
2. Press the Delete By Symbol soft key.
o
>
r
e
w
PerAtIon
evIewIng And
dItIng
AyPoInts


Advertisement

Table of Contents
loading

Table of Contents