Creating Waypoints Manually - Garmin GPSMAP 3005C - Marine GPS Receiver Owner's Manual

b o > c u
AsIc PerAtIon reAtIng And sIng

Creating Waypoints Manually

You can manually enter position coordinates to create a waypoint using the Points
tab on the Main Menu. This method is useful for creating a waypoint at a specific
latitude/longitude position from a chart or other source.
CAUTION: When entering a waypoint manually, be sure that the unit is set
to the same position format and map datum as the paper chart or coordinates
source. Entering coordinates into the GPSMAP 3005C while it is set to a datum
different from the datum in which the coordinates were created can result in an
incorrect waypoint location.
To create a new waypoint by entering position coordinates:
1. Press and hold ADJ/MENU to open the Main Menu.
2. Highlight the Points tab. You can also mark your present location using
the steps on page 13, and then proceed to step 4.
3. Press the New Waypoint soft key. The Review Waypoint Page appears
with the next available waypoint number and the receiver's last known
location as the default name and location.
4. Use the ROCKER to highlight the Position field, and press ENTER.
5. Enter position coordinates using the ROCKER, and press ENTER.
6. To accept the waypoint with the default information, press the OK soft key
OR
To change any waypoint information, highlight the appropriate field and
press ENTER. After entering your changes, press the OK soft key. For
information on editing waypoints, see

w
AyPoInts
page 15.
You can
enter locaton
coordnates
manually.
Two other options are available on the Review Waypoint Page:
• Add to Route—adds the new waypoint to the end of a route.
• Move Wpt (waypoint)—moves or projects the waypoint to a new location
on the map display.
To add a new waypoint to a route:
1. Press the Add To Route soft key. The Select Route Page appears.
2. Highlight a route or New Route, and press ENTER.
3. Highlight OK, and press ENTER to add the waypoint to the route.
Review Waypoint Page
GPSMAP 3005C Owner's Manual