Saving User Files On Sd Memory Cards; Playback - Panasonic AGHPG10 - MEMORY CARD PORTABLE RECORDER Operating Instructions Manual

Saving USER files on SD memory cards

Up to four sets of settings can be saved as four
files on the SD memory card, and they can be
loaded from the card.
1
Press [MODE] to display the thumbnail
display off screen.
2
Select "USER FILE" on the setting menu
"CARD FUNCTIONS" screen, select "YES",
and press [STILL].
• Basic operations on the setting menus (page
70)
CARD FUNCTIONS
- - - -
USER FILE
SD CARD FORMAT - - - -
3
Using [FF] or [REW], select the file number
(1, 2, 3 or 4).
SCENE FILE (SD CARD)
FILE SELECT
READ - - - -
WRITE YES
FILE 1 NO FILE
FILE 2 NO FILE
FILE 3 NO FILE
FILE 4 NO FILE
TITLE RELOAD - - - -
4
Using [STOP] and [PLAY], select "WRITE",
and press [STILL].
SCENE FILE (SD CARD)
FILE SELECT
READ - - - -
WRITE YES
FILE 1 NO FILE
FILE 2 NO FILE
FILE 3 NO FILE
FILE 4 NO FILE
TITLE RELOAD - - - -
5
Display "YES" using [REW] and [PLAY], and
press [STILL].
• In the figure below, "TITLE1" is the filename.
• After the data has been saved, "WRITE OK"
is displayed.
SCENE FILE (SD CARD)
WRITE FILE 1
YES - - - - PUSH STILL
TITLE EDIT
T I T L E 1
6
Press [MENU] four times to release the
menu mode.
To give titles to files
1) Perform steps 1 to 4.
2) Select the characters using [STOP] and [PLAY],
and move to the next character using [STILL].
• Any of the following characters can be input.
(Space), A to Z, 0 to 9, : ; < = > ? @ [¥] ^ _
-. /
• All the characters can be deleted using the
unit's [RESET] button.
3) After all the characters have been input, press
[FF] at the left end of the characters (or [REW]
at the right end), and press [STILL].
To re-load files from SD memory cards
1) Performs steps 1 and 2.
2) Move to [READ] using [STOP] and [PLAY],
display "YES", and press [STILL]. The files are
now re-loaded.
3) If "TURN POWER OFF" appears after loading,
turn off the power, and then turn it back on. The
loaded files are now set.
• If "WRITE NG FORMAT ERROR" is displayed,
format the SD memory card. (Page 26)
• If "WRITE NG WRITE PROTECT" is displayed,
release the SD memory card protection.
• If "WRITE NG CANNOT ACCESS" is displayed,
complete the other operations (such as
playback), and then proceed to operate.
• If "WRITE NG ERROR" is displayed, the SD
memory card may be defective. Replace the
card.
27