JVC RX-D201S - AV Receiver Instructions Manual page 12

For TV and video format
This receiver cannot convert the video signals. When the video
signal of one video component is different from that of the other
(for example, one is S-video, the other is Composite), you may
not see the pictures appropriately. In this case, unify the video
signals of all the video components, or you need to switch the
video signal of TV each time you change the source.
For an analogue decoder
To watch through or to record a scrambled program on your
VCR, connect the analogue decoder to your VCR and select the
scrambled channel on your VCR.
If there is not an appropriate terminal for the decoder connection
on your VCR, connect the decoder to your TV.
Refer also to the manuals supplied with these components.
Audio/video connection
In addition to the SCART terminals, this receiver is equipped with the following video terminals:
• Component video input/output: VIDEO IN, DVR/DVD IN, MONITOR OUT
• Composite and S-video input: VIDEO IN
IMPORTANT
The component video signals from the COMPONENT VIDEO jacks are transmitted only through the MONITOR OUT jacks.
Therefore, if the TV is connected to the receiver through the SCART terminal (TV) and a playing video component is connected to the
receiver through the component video jacks (VIDEO IN or DVR/DVD IN), you cannot view the playback picture on the TV.
7 Connecting a DVD recorder or DVD player to the DVR/DVD IN jacks
To fully enjoy Dolby Digital and DTS multi-channel software (including Dual Mono software), connect the DVD recorder or DVD player
through the digital input terminals (see page 10).
When you connect a DVD recorder or DVD player with its stereo output jacks:
COMPONENT VIDEO
Y
P
B
P
R
VIDEO IN DVR/DVD IN MONITOR OUT
NOTES
•
Do not connect different components to the AUDIO DVR/DVD IN jacks and AV IN/
OUT (SCART) DVR/DVD terminal (see page 7); otherwise, sounds from both
components are come out of the speakers at the same time.
• Select the analogue input mode. See "Selecting the analogue or digital input mode"
on page 12.
•
You can enjoy digital sound if using a digital coaxial or optical cable. When shipped
from the factory, the audio input mode for a DVD recorder and DVD player is set to
use the digital coaxial terminal (DIGITAL IN 1 (DVR/DVD)). For details of digital
connection, see page 10.
•
When connecting a DVD recorder or DVD player to the component video input jacks,
select the component video input mode (DVD VIDEO IN) correctly. If you do not, you
cannot view the playback picture on the TV. See page 20 for details.
8
Green
Blue
Red
AM EXT
AUDIO
VIDEO DVR/DVD
IN IN
White
L
Red
R
For T-V LINK
• You can use the T-V LINK function if you connect a T-V LINK
compatible TV and VCR to this receiver with a fully wired
SCART cables. For details on T-V LINK, refer also to the
manuals supplied with the TV and the VCR.
• Connect a SCART cable to EXT-2 terminal on the JVC's T-V
LINK compatible TV for the T-V LINK function.
• Some video components support the data communication like
T-V LINK. For complete details, refer also to the manuals
supplied with these components.
Turn off all components before making
connections.
Component video cable (not supplied)
DVD recorder or DVD player
ı
Stereo audio cable (not supplied)
Å To component video output
• Connect Y, P
ı To left/right audio channel output
Å
, and P correctly.
B R