Connecting Your Pc To The Max Server; Determining The Ip Address Of Your Max Server - AMX WINMAX MAX SERVER CONTROL SOFTWARE Instruction Manual

WinMAX - Overview and Installation

Connecting Your PC to the MAX Server

The first step in launching the WinMAX application is establishing a connection with the MAX
server.
The PC running WinMAX must be connected to the same LAN as the MAX Server
that you want to connect to.
The first time you launch WinMAX, you should expect to receive an error message indicating that
you have not connected to the MAX server. Click OK to close the error message dialog, and
WinMAX will launch. By default, the application opens to the System Information tab, where you
will specify the IP Address of the MAX server.
Type the IP Address of the MAX Server into the field labeled Server's IP Address or URL. Then
click on the disk icon next to the text-entry field to save this configuration. The blank fields should
fill in momentarily, indicating that the Server has been recognized.

Determining the IP Address of Your MAX Server

In the event that you do not know the IP Address assigned to the target MAX Server, you will need
to access the MAX Admin Menu (FIG. 1) on the target server. This requires connecting a PS/2
mouse and keyboard, and VGA monitor directly to the server:
FIG. 1 MAX Admin Menu
Select IP Settings to view the server's IP Address. Write it down and close the IP Settings window.
When the system prompts you to save any changes, select No.
2
Use the arrow keys on the keyboard to highlight the desired option, and press Enter to
make a selection. Do not use the arrow keys on your keyboard's numeric keypad.
Beyond this menu, press the TAB button to navigate through the elements on the pages
until an asterisk appears next to the desired selection.
Press the spacebar to make a selection (press again to de-select).
WinMAX MAX Server Control Software