Table of Contents
Advertisement
Record Tab
Duplicate entries
If the system suspects that the disc has already been recorded to the MAX Server, the Possible
Duplicate field will display Yes (FIG. 46).
FIG. 46 Possible duplicate disc
In this case, perform a search in either the Music or Movies tab to verify whether or not this title
already exists on the MAX Server.
If the disc has in fact already been recorded, press the Eject button. Otherwise, proceed with the
recording process.
Some discs cannot be identified at all, in which case the program will prompt you to
manually enter the necessary information in order to properly catalog the disc.
Specify a Local CD/DVD-ROM Drive To Use
To load DVD movies using your PC, you must have a DVD-ROM (as opposed to a
CD-ROM) drive installed on the PC.
If the program doesn't respond when you load a disc, verify that WinMAX is looking at the right
CD or DVD-ROM drive on your PC. This setting is made in the Application Settings dialog
(FIG. 47):
FIG. 47 Application Settings dialog - Specify a CD-ROM drive to watch
1. Click the Application Settings button (in the System Information tab) to open the Application
Settings dialog.
2. Select config from the Section drop-down menu.
3. Select DriveNum from the Keys list.
44
Indicates that the disc loaded has possibly
already been recorded to the MAX Server.
Search the Music or Movies tabs to verify
that you want to add this title to the collection
before recording.
DriveNum Value (on local PC):
0 = First CD-ROM drive
1 = Second CD-ROM drive
WinMAX MAX Server Control Software
Advertisement
Table of Contents
