Komatsu D61EX-15EO Brochure

STANDARD EQUIPMENT FOR BASE MACHINE
Air cleaner, double element with Muffler with curved exhaust pipe
dust indicator Palm Command Control System (PCCS)
Alternator, 60 ampere Radiator reserve tank
Backup alarm Rain Cap (Intake air)
Batteries, 170 Ah/12V x 2 Rear cover
Decelerator pedal Rear view mirror
Electronic instrument monitor panel ROPS mounting brackets
Engine hood and gull-wing side covers Starting motor, 5.5 kW/24V
Fenders Suspension seat, reclining with vinyl
Floor mat material
Front pull hook
Track roller guard, center section
High mount footrests
(EX long track, PX)
HSS hydrostatic steering system
Track roller guard, end sections
Hydraulic drive radiator cooling fan with
Trackshoe assembly:
clean mode
—Sealed and lubricated track
Hydraulics for Power Angle Tilt dozer
600 mm 24" single grouser
Lighting system, (includes 2 front, 1 rear)
shoe (EX)
Locks, filler caps and covers
860 mm 34" single grouser
shoe (PX)
OPTIONAL EQUIPMENT
Cab Suspension seat, with high back
Cab accessories: Seat, air suspension with high back
—Cup holder (cab only)
—Lunch box holder Seat belt, retractable
—12V Power supply Hitch, deluxe
—Sun Visor Intake pipe with precleaner
AM/FM Radio with cassette Hydraulics for ripper (EX)
Air conditioner Long track arrangement (EX)
Heater and defroster ROPS canopy
Suspension seat, reclining with ROPS for cab
fabric material (cab only) ROPS canopy with sweep
CAB ROPS FOR CAB
Additional weight 490 kg 1080 lb Additional weight 240 kg 530 lb
All-weather, enclosed pressurized cab Meets ISO 3471, SAE J/ISO 3471
Meets ISO3449 FOPS Standard. ROPS standards.
Dimensions: Dimensions:
—Length: 1760 mm 5'9" —Length: 530 mm 1'9"
—Width: 1325 mm 4'4" —Width: 1650 mm 5'5"
—Height: 1595 mm 5'3"
—Height from floor to ceiling:
1545 mm 5'1"
SHOES
Ground contact
Models Shoe Additional weight
area
860 mm 34"
-400 kg 54520 cm
D61PX circular-arc
-880 lb 8,451 in
shoe
www.Komatsu.com
CEN00215-00 Materials and specifications are subject to change without notice
Underguards, engine and transmission
Water separator
ROPS CANOPY (without cab)
Meets ISO 3471, SAE J/ISO 3471
ROPS standards, and ISO 3449 FOPS
standard.
Roof dimensions:
—Length: 1830 mm 6'0"
—Width: 1825 mm 6'0"
—Height from operator compartment
floor: 1670 mm 5'6"
Light, working, cab additional
Light, rear working (ROPS canopy,
additional)
Track guard, full length
AR track assembly
(abrasion resistant bushings)
Underguard, heavy-duty
Vandalism protection cover
for instrument panel
MULTI-SHANK RIPPER (EX)
Additional weight (including hydraulic
control unit): 1645 kg 3,630 lb
Beam length: 2170 mm 7'1"
Maximum digging depth: 665 mm 2'2"
Maximum lift above ground: 565 mm 1'10"
Additional ground
pressure to tractor
-1.0 kPa
2
-0.01 kg/cm 2
2
-0.14 psi
Printed in Japan 200701 IP.AD.SIN (10)
is a trademark of Komatsu Ltd. Japan
D61EX
-15E0
D61PX
-15E0
C
RAWLER
HORSEPOWER
Gross: 127 kW 170 HP @ 1850 rpm
Net: 125 kW 168 HP @ 1850 rpm
OPERATING WEIGHT
D61EX-15E0 16710 kg 36,840 lb
D61PX-15E0 18710 kg 41,250 lb
D
61
Photo may include optional equipment.
D
OZER