Mechanical; Chassis Description; Dimensions And Weight; Table 3. Supported Chassis Configurations - Dell PowerEdge R510 Technical Manual

Dell

4 Mechanical

4.1 Chassis Description

PowerEdge R510 chassis is a 2U rack system. The chassis is not swappable. Supported configurations are
detailed in Table 3.
4-HDD Configuration
5 x cabled 3.5‖ HDD bay
Non-Redundant 480W PSU
Quad pack diagnostic LED

4.2 Dimensions and Weight

Form Factor
Dimension
(HxWxD)
Max Weight
Empty Weight
Measurements in this table correspond to the diagram shown in Figure 3.
PowerEdge
R510
Configuration Xa
4 and 8 HDD
12 HDD
* Zb goes to the nominal rear wall external surface where the motherboard I/O connectors reside.
PowerEdge R510 Technical Guide
Supported Chassis Configurations
Table 3.
8 x hot-swap 3.5‖ or 2.5‖ HDD bay
750W redundant PSU (n+0 or n+1
option)
11G diagnostic LCD (identical to the
PowerEdge R710)
Table 4.
4-HDD Configuration
3.40 x 17.19 x 24.09 (in);
86.4 x 436.6 x 610.2 (mm)
16 Kg/35.2 lbs
13.6 Kg/29.92 lbs
PowerEdge R510 Dimensions
Table 5.
Xb
482.4 mm 436.6 mm 86.4 mm 35.0 mm
482.4 mm 445.2 mm 86.76 mm 35.0 mm
8-HDD Configuration
PowerEdge R510 Weight
8-HDD Configuration
2U Rack
22.5 Kg/49.5 lbs
13.5 Kg/29.7 lbs
Note:
Y Za w/ bezel Za w/o bezel Zb*
12-HDD Configuration
12 x hot-swap 3.5‖ or 2.5‖ HDD
bay + 2 x internal cabled 2.5‖ HDD
750W redundant PSU (available for
n+0 or n+1 option)
Rack-ear diagnostic LED
Redundant system cooling
12-HDD Configuration
3.42 x 17.53 x 26.17 (in);
86.7 x 445.2 x 664.6 (mm)
29.0Kg/63.8lbs
15.85 Kg/34.87 lbs
Zc
610.2 642.0
21.0 mm mm mm
21.0 mm 664.65 697.05
mm mm
18