Ipv6 Neighbor; Ipv6 Neighbor Settings - D-Link xStack DGS-3426 User Manual

xStack DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch

IPv6 Neighbor

IPv6 neighbors are devices on the link-local network that have been detected as being IPv6 devices. These devices can forward
packets and keep track of the reachability of routers, as well as if changes occur within link-layer addresses of nodes on the
network or if identical unicast addresses are present on the local link. The following two windows are used to view IPv6 neighbors,
and add or delete them from the Neighbor cache.

IPv6 Neighbor Settings

The following window is used to view and configure current IPv6 neighbors of the Switch. To view this window, click
Administration > IPv6 Neighbor > IPv6 Neighbor Settings.
The following fields can be viewed:
Parameter
Neighbor
Link Layer Address
Interface
State
To remove an entry, click the Delete button for the entry being removed. To completely clear the IPv6 Neighbor Settings, click
the Clear All button. To add a new entry, click the Add button, revealing the following screen to configure:
Figure 6- 40. IPv6 Neighbor Settings window
Description
Displays the IPv6 address of the neighbor device.
Displays the MAC Address of the corresponding IPv6 device.
Displays the Interface name associated with this IPv6 address.
Displays the running state of the corresponding IPv6 neighbor. The user may see six possible
entries in this field, which are Incomplete, Stale, Probe, Reachable, Delay or Static.
73