xStack DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch
SNTP Settings
Time Settings
To configure the time settings for the Switch, click Administration > SNTP Settings > Time Settings, the following window
will be displayed.
The following parameters can be set or are displayed:
Parameter
System Boot Time
Current Time
Time Source
SNTP State
SNTP Primary Server
SNTP Secondary Server
SNTP Poll Interval in
Seconds (30-99999)
Year
Month
Day
Figure 6- 26. Current Time: Status window
Description
Displays the time when the Switch was initially started for this session.
Displays the Current Time.
Displays the time source for the system.
Current Time: SNTP Settings
Use this pull-down menu to Enabled or Disabled SNTP.
The IP address of the primary server from which the SNTP information will be taken.
The IP address of the secondary server from which the SNTP information will be taken.
The interval, in seconds, between requests for updated SNTP information.
Current Time: Set Current Time
Enter the current year, to update the system clock.
Enter the current month, to update the system clock.
Enter the current day, to update the system clock.
Current Time: Status
60