Creating Your Disk Array - TYAN TRINITY I875P User Manual

Trinity i875P S5101

4.2 - Creating Your Disk Array

WARNING: Before installing the driver into an existing system, backup
any necessary data. Failure to follow this accepted PC practice could
result in data loss.
1. Boot your system. If you set the embedded Promise controller as RAID configuration and
this is the first time you boot with the PDC20378 and drives installed, the Promise
onboard BIOS will display the following screen.
FastTrak 378 (tm) BIOS Version 1.00.0.XX
(c) 2002-2005 Promise Technology, Inc. All Rights Reserved.
No Array is defined . . .
Press <Ctrl-F> to enter FastBuild (tm) Utility or
Press <ESC> to continue booting ...
2. Press <Ctrl-F> keys to display the FastBuild™ Utility Main Menu
FastBuild (tm) Utility 2.xx (c) 2002-2005 Promise Technology, Inc.
Auto Setup ........................................................ [ 1 ]
View Drive Assignments ................................... [ 2 ]
Define Array...................................................... [ 3 ]
Delete Array...................................................... [ 4 ]
Rebuild Array .................................................... [ 5 ]
Press 1...5 to Select Option
Chapter 4: SATA/RAID Setup (for SATA RAID model)
[ Main Menu ]
[ Keys Available ]
4-2
http://www.tyan.com
[ESC] Exit