Load Fail-Safe Defaults - TYAN TRINITY I875P User Manual

Trinity i875P S5101
CPU Voltage Regulator:
This option allows you to change the default core voltage of the processor. Please always
leave at default settings.
Default / +125mv / +250mv / +375mv / +500mv / +625mv / +875mv
CPU Clock:
Enter a decimal number to set the front side bus speed of the motherboard. For all purposes
and to maintain stability, please keep this setting at its default setting.
100MHz,133MHz or 166MHz by CPU setting.
Memory Frequency for:
This option allows you to select DRAM Speed
Auto by SPD / DDR333 / DDR400 / Auto
3.10 – Load Fail-Safe Defaults
Phoenix – AwardBIOS CMOS Setup Utility
► Standard CMOS Features
► Advanced BIOS Features
► Advanced Chipset Features
► Integrated Peripherals
► Power Management Setup
► PnP/PCI Configurations
► PC Health Status
Esc: Quit
F10: Save & Exit Setup
When you press <Enter> on this item you get a confirmation dialog box with a message similar
to:
Pressing 'Y' loads the BIOS default values for the most stable, minimal-performance system
operations.
► Frequency/Voltage Control

Load Fail-Safe Defaults

Load Optimized Defaults
Set Supervisor Password
Set User Password
Load Fail-Safe Defaults (Y/N)? N
Save & Exit Setup
Exit Without Saving
↑ ↓ ← →: Select Item
Load Fail-Safe Defaults
Load Fail-Safe Defaults (Y/N)? N
3-24
http://www.tyan.com
Chapter 3: BIOS Setup