Pnp/Pci Configurations - TYAN TRINITY I875P User Manual

Trinity i875P S5101
3.7 – PnP/PCI Configurations
Options related to all the configurations of PnP / PCI resources.
Phoenix – AwardBIOS CMOS Setup Utility
Reset Configuration Data
Resources Controlled By
X IRQ Resources
PCI / VGA Palette Snoop
PCI Device list
PCI1&6 INT Assignment
PCI2 INT Assignment
PCI3 INT Assignment
PCI4 INT Assignment
PCI5 INT Assignment
Giga LAN INT Assignment
PromiseSATA INT Assignment
Realtek LAN INT Assignment
↑↓←→: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Reset Configuration Data:
This setting allow you to clear ESCD data.
Enabled / Disabled
Resources Controlled By:
Default whether system resources are controller by BIOS or by user.
Manual / Auto (ESCD)
PCI / VGA Palette Snoop:
Leave as default.
Enabled / Disabled
PCI 1&6 INT Assignment:
Default item to distribute IRQ to set Device.
Auto / 3 / 4 / 5 / 7 / 8 /11 / 12 /14 /15
GbE LAN INT Assignment:
Leave as default.
Auto / 3 / 4 / 5 / 7 / 8 /11 / 12 /14 /15
PromiseSATA INT Assignment:
Leave as default.
Auto / 3 / 4 / 5 / 7 / 8 /11 / 12 /14 /15
Realtek INT Assignment:
Leave as default.
Auto / 3 / 4 / 5 / 7 / 8 /11 / 12 /14 /15
PnP / PCI Configurations
[Disabled]
_________________________
[Auto (ESCD)]
Press Enter Menu Level ►
Default is Disabled.
[Disabled] Select Enabled to
[Enabled] Reset Extended System
[Auto] Configuration Data
[Auto] ESCD> when you exit
[Auto] Setup if you have
[Auto] Installed a new add-on
[Auto] and the system
[Auto] reconfiguration has
[Auto] caused such a serious
[Auto] conflict that the OS
cannot boot
3-21
http://www.tyan.com
Chapter 3: BIOS Setup
Item Help