Table of Contents
Advertisement
drivers for WinNT 4.0
The "Bmide" folder will install driver support for VIA IDE Busmaster.
NOTE: this driver is for Win95 and WinNT 4.0 users. Win98 users normally
DO NOT have to install this driver; Win98 has built in VIA IDE Bustmaster
driver when installed originally. Install only if you are having conflicts or
exclamation marks with Hard disk controllers in Device Manager
The "viareg" folder is for "VIA Power Management Controller" and "VIA
PCI to USB Universal Host Controller". NOTE: this driver is for Win95
users. There are no drivers for WinNT 4.0. No need to install for Win98
users.
The "virq13 or virq11" folder will install "VIA PCI IRQ Routing Miniport
Driver". NOTE: Enable "OnChip USB" in BIOS Chipset Features setup
menu and Enable "Assign IRQ for USB" in PNP/PCP Configuration Setup
menu. NOTE II: this driver is for Win95 users only, however, some Win98
users may need to install this driver who are having conflicts in Device
Manager. There are no drivers for WinNT 4.0
Q: When Windows 95 restarts for the first time I get the following message:
"Device IOS failed to initialize. Windows Protection Error. You must reboot
your computer." How do I fix this to get into Windows 95 normally?
A: Follow the following link to download the patch file for this problem:
http://www.amd.com/products/cpg/k623d/win95_update_k6.html
Q: What is JP14 for?
A: JP14 (and JP7) are provided on some S1590 versions. The jumpers control
the power supply feeding the L2 cache. The two jumpers regulate the
power supply voltage in order to provide the circuitry with ~3.3V for normal
operation. Basically, if you have an AT power supply, have both jumpers
JP7 and JP14 CLOSED or ON. If you have an ATX power supply, have them
both OPEN or OFF. Most newer versions of the S1590S motherboard do
not have Jumpers JP14 or JP7 - if so, please disregard this FAQ (the
settings are preset and built-in to the motherboard).
S1590 Trinity 100AT
31
Advertisement
Table of Contents
