Asf2.0/Smdc Select(Jp4,Jp5); Clear Cmos Jumper (Jp6) - TYAN TOMCAT K8SH Manual

2.05 – ASF 2.0/SMDC Select (JP4, JP5)
2.06 – Clear CMOS Jumper (JP6)
Pin_3 Pin_3
Pin_1 JP4 JP5 Pin_1
Pin_3 Pin_3
Pin_1 JP4 JP5 Pin_1
Pin_3
Default
Pin_1
You can reset CMOS settings by using this
jumper if you have lost your system/setup
password or need to clear the system BIOS
settings.
Power off the system and set JP6 to (2-3)
position and then power on to boot up the
system. CMOS will be cleared when the
screen is on. Finally shut down the power,
recover JP6 to default (1-2), power on the
system again after done.
12
http://www.tyan.com
DEFAULT,
ASF2.0
SUPPORT
SMDC
Pin_3
Clear
Pin_1