Windows 2000 - TYAN TOMCAT I915 User Manual

Tomcat i915 S5120

4.3.3 Windows 2000

New Installation
The following details the installation of the FastTrak Serial ATA RAID Controller drivers while
installing Windows 2000.
1. Start the installation:
•
Floppy Install: Boot the computer with the Windows 2000 installation diskettes.
•
CD-ROM Install: Boot from the CD-ROM. Press F6 after the message "Press F6 if you
need to install third party SCSI or RAID driver" appears.
2. When the Windows 2000 Setup window is generated, press S to specify an Additional
Device(s).
3. Insert the FastTrak S150 driver diskette into drive A: and press Enter.
4. Choose Win2000 Promise FastTrak 579 (tm) Controller from the list that appears on screen
then press Enter.
5. The Windows 2000 Setup screen will appear again saying "Setup will load support for the
following mass storage devices:" The list will include "Win2000 Promise 579 (tm) Controller".
NOTE: If there are any additional devices to be installed, specify them now.
When all devices are specified, continue to the next step.
6. From the Windows 2000 Setup screen, press Enter. Setup will now load all device files and
then continue the Windows 2000 installation.
Existing Installation
After installing the FastTrak Serial ATA RAID controller and rebooting your system, Windows
2000 setup will show a "New Hardware Found" dialog box.
Under Windows 2000, "PCI Mass Storage Controller" will be displayed.
1. Choose Add New Hardware Wizard from the list, and then press Enter.
2. Choose Add/Troubleshoot a device and click Next. The new hardware wizard will show
device list
3. Choose Mass Storage controller and click Next. At the following screen click Finish.
4. Choose Display a list the known drivers for this device so that I can choose a specific driver
then click Next.
5. When the Windows 2000 supported SCSI adapter drivers list appears, click Have disk.
6. Insert the FastTrak driver diskette in drive A:\.
7. Type A:\Win2000 in the text box. Click OK.
8. Choose Win2000 Promise FastTrak 579 (tm) Controller from the list that appears on screen,
then click Next.
9. Click Yes to confirm continue the installation and copy the driver to system.
10. Remove the diskette and click Finish to restart the system. Windows 2000 will then restart
for the driver installation to take effect.
Confirm Installation
1. Right-click on the My Computer icon and select Manage from the popup menu.
2. From the left panel, select Device Manager.
3. Click the "+" in front of SCSI controllers. "Win2000 Promise FastTrak 579 (tm) Controller"
should appear.
Chapter 4: SATA/RAID Setup (for SATA RAID model)
4-8
http://www.tyan.com