Jumpers And Connectors - TYAN TOMCAT I915 User Manual

Tomcat i915 S5120

2.5 Jumpers and Connectors

Jumpers and connectors are provided on your motherboard for configuration and connection
to peripherals. The following section shows you how to set your jumpers and use your
connectors.
Jumper/
Connector
J22
J23/J24/J25/J26
J27/J28*
J30/J31
JP1 (PFAN)
JP2/JP3
(FAN1/FAN2)
JP4*
JP5/JP6
JP8
JP9
JP10/JP11
(USB3/USB4)
JP13
JP15**
JP18
JP19 (FAN4)
JP20 (FAN3)
JP21
JP22**
JP23
SATA RAID (J27/J28) and IDE RAID (JP4) are only for models with Promise SATA RAID.
*
JP15 and JP22 are reserved for OEM use only.
**
Jumper Legend
Jumper OFF – open (without jumper cap)
Jumper ON – closed (with jumper cap)
COM1 Port
Serial ATA Connectors
RAID Serial ATA1/ATA2 Connector (optional)
S/PDIF-in and S/PDIF-out Connector
CPU Fan Connector with tachometer monitoring and
fan speed control
Chassis Fan Connector with tachometer monitoring and
fan speed control
RAID IDE Connector (optional)
IEEE1394a Connector
Front Panel Audio Connector
CD Audio Input Connector
Front Panel USB Connector
Clear CMOS Jumper
Reserved
Gigabit LAN (BCM5751) Enable/Disable Jumper
Chassis Fan Connector
Chassis Fan Connector with tachometer monitoring
Front Panel System Connector
Reserved
10/100 LAN (Intel 82551QM) Enable/Disable Jumper
http://www.tyan.com
Chapter 2: Board Installation
Function
2-5
Ref. Page
Page 2-6
Page 2-6
Page 2-6
Page 2-7
Page 2-7
Page 2-8
Page 2-8
Page 2-9
Page 2-9
Page 2-10
Page 2-10
Page 2-11
Page 2-11
Page 2-12
Page 2-12
Page 2-13